To Install Print Drivers; Configure Services - Xerox ColorQube 9201 System Administrator Manual

Device Connection and Quick Setup
At the Device:
1. Press the <Machine Status> button.
2. Touch the [Machine Information] tab.
3. Touch the [Installed Options] button.
4. All the services selected on the Internet Services page are displayed and the Status will display
either Enabled or Disabled.

To Install Print Drivers

Refer to Print Drivers on page 107 of this guide and follow the instructions provided.

Configure Services

If you have installed one or more optional service on your device you can configure the service from
Internet Services.
If you need more specific information about services and how to configure them, refer to the following
chapters for each service:
• Workflow Scanning
• E-mail on page 215
• Internet Fax
• Server Fax on page 259
• Embedded Fax
• LAN Fax on page 269
• Network Accounting
1. At your Workstation, open the web browser and enter the IP address of the device in the Address
bar, and press [Enter].
Click on the [Properties] tab.
2.
3. If prompted, enter the Administrator User ID and Password. The default is [admin] and [1111].
4. Click on the [Login] button.
5. Select [Configuration Overview] in the directory tree.
6. Click on the [Settings] button next to the service that you want to configure, for example E-mail.
Note: If you cannot see any services, then they have not been installed on your device.
7. Click the [Configure] button next to each step and enter the information to configure your
service. Click on the [Save] button when you have finished with each screen.
8. If you have more than one service to configure, click on the [Configure Next Service] button.
Otherwise, click [Close].
Test your service at the device to verify that it is configured correctly.
18 Xerox ColorQube™ 9201/9202/9203
System Administrator Guide
on page 173
on page 229
on page 243
on page 297