Xerox ColorQube 9201 System Administrator Manual page 177

To Schedule On Demand Overwrite
A TCP/IP network-connected device can be set to overwrite image data on a daily, weekly, or monthly
basis. To schedule a daily overwrite, perform the following steps.
1. At your Workstation, open the web browser and enter the IP address of the device in the Address
or Location field. Press [Enter].
2. Click the [Properties] tab.
3. If prompted, enter the Administrator User ID and Password. The default is [admin] and [1111].
4. Click on the [Login] button.
5. Click on the [Security] link.
6. Click on the [On Demand Overwrite] link.
7. Select [Scheduled] in the directory tree.
8. In the On Demand Overwrite > Scheduled page:
a. From the [Frequency] drop-down menu, select the frequency for the overwrite to occur.
b. If [Daily] is selected, specify the time for the Overwrite in [Time] (24-Hour Clock). The device
will be taken offline each day at the time specified to perform the overwrite.
If [Weekly] is selected, select a day in the week for [Day of Week], for [Time] specify the
time for the overwrite to run on that day of the week.
If [Monthly] is selected, select a day between 1 and 28 for [Day of Month], for [Time]
specify the time for the for the overwrite to run on that date of the month.
c. Select either [Standard] or [Full] overwrite you require for Type.
d. Click on the [Apply] button.
e. Click on the [OK] button when you see the message "Properties have been successfully
modified".
Select [Logout] in the upper right corner of your screen if you are still logged in as Administrator,
9.
and click on the [Logout] button.
Xerox ColorQube™ 9201/9202/9203
System Administrator Guide
Security
169