Xerox ColorQube 9201 System Administrator Manual page 145

7. Select [Setup] in the directory tree.
8. The Authentication Configuration page displays, in the Current Configuration area, click on the
[Edit Methods] button for Authentication.
a. In the Where is the Information Located? area select [Xerox Secure Access] form the drop-
down menu for Device User Interface Authentication.
b. Select your required option from the [Web User Interface Authentication] drop-down menu.
When a user attempts to access Internet Services they are prompted to enter their login
information. The option selected from the web user interface Authentication menu defines
how the device will validate the user's rights to access Internet Services. This is required
because if the user normally authenticates at the device with a card reader, there would be
no method for the device to authenticate users who access Internet Services from their
workstations.
• Select [Locally on the Device] to validate users listed in the Local User Information
Database. This option requires you to configure accounts in the Local User Information
Database.
• Select [Remotely on the Network] to validate users via an Authentication Server. This
option requires you to have a server that will provide authentication of user login details.
Authentication via Kerberos (Solaris, Windows 2000), NDS (Novell), SMB (Windows
NT4/2000) or LDAP is supported.
c. Select required method from the [Authorization] drop-down menu. The card reader and
Authentication Solution authenticates (validates) the user. The Authorization method
determines which areas of the device a user is allowed to access. There are two options:
• Select [Locally on the Device]: if you want the device to check the Local User
Information Database for levels of authorization.
• Select [Remotely on the Network]: if you want to use an LDAP server to determine
levels of authorization.
If you selected Remotely on the Network (from the Location of Access Rights box), configure LDAP
communications as stated in the Configure Authentication for LDAP/LDAPS in the Authentication
section of this guide.
d. Check the checkbox next to [Automatically retrieve the following information for the
authenticated user from LDAP: Home directory for the 'Scan to Home' service. E-mail
address for the 'E-mail' and 'Internet Fax' services] under Personalization is checked if you
want to set the From address to the logged in user's e-mail address, when they log in via
Secure Access.
e. Click on the [Next] button to return to the Authentication Configuration page.
9. In the Authentication -(Required) area:
a. Click on the [Configure] button for Device User Interface Authentication - Xerox Secure
Access.
b. The device will automatically configure itself to work with the XSA remote server. Click on the
[Manually Configure] button if the XSA remote server does not configure automatically.
In the Server Communication area, select either [IPv4 Address] or [Hostname].
c.
d. Enter details in the IP Address and Port or Host Name and Port fields.
e. Enter the details in the [Path] field.
f. Under the Device Log In Methods heading, select one of the following:
Xerox ColorQube™ 9201/9202/9203
System Administrator Guide
Authentication
137