Xerox ColorQube 9201 System Administrator Manual page 83

9. In the Authentication Failure Generic Traps area, check the [Enable] checkbox to enable
Authentication Failure Generic Traps to generate a trap for every SNMP request by the device
which contains an invalid community name.
Note: When the Authentication Failure Generic Trap is enabled, this machine will generate a trap
for every SNMP request that is received by the machine which contains an invalid community
name.
10. Click on the [Apply] button to save changes, or click on the [Advanced Settings] button to add or
edit an IP or IPX address. For further information, refer to
To configure SNMP v3
1. At your Workstation, open the web browser and enter the IP address of the device in the Address
bar, and press [Enter].
2. Click on the [Properties] tab.
3. If prompted, enter the Administrator User ID and Password. The default is [admin] and [1111].
4. Click on the [Login] button.
5. Click on the [Connectivity] link.
6. Click on the [Protocols] link.
Note: SSL (Secure Socket Layer) must be enabled before you can configure SNMP v3. Click the
[Configure HTTPS] link on the SNMP Internet Services screen to complete this task. Once SSL is
enabled, return to the SNMP screen.
Before, enabling the HTTP Security Mode, the device must have a Machine Digital Certificate
configured. For information on Machine Digital Certificate, see
Management on page 151.
Select [HTTP] in the directory tree.
7.
a. Select enable for the [Secure HTTP (SSL)] option.
b. Change the [Secure HTTP (SSL) Port Number] if required. The default is 443.
c. Click on the [Apply] button to accept the changes.
8. Select [SNMP] in the directory tree.
9. To configure SNMP v3, in the SNMP Properties area:
a. Check to ensure the [Enable SNMP v3 Protocols] checkbox is selected.
Click on the [Edit SNMP v1/v2c Properties] button.
b.
System Administrator uses the Edit SNMP v3 Properties page to configure Authentication
Password and Privacy Password for the Administrator Account.
10. In the Administrator Account area:
a. Check the [Account Enable] checkbox to create an administrator account that can be used
to provide more extensive access to the objects on the device.
b. Enter the required data in the [Authentication Password] and [Confirm Authentication
Password] fields.
c. Enter the required data in the [Privacy Password] and [Confirm Privacy Password] field.
11. In the Print Drivers/Remote Clients Account area:
Check the [Account Enabled] checkbox to Create an account for bi-directional print drivers
a.
and Xerox remote clients.
SNMP Advanced Settings
Machine Digital Certificate
Xerox ColorQube™ 9201/9202/9203
System Administrator Guide
Network Installation
on page 76.
75