Xerox ColorQube 9201 System Administrator Manual page 303

When you use the print driver to print a document you will be asked to enter your user ID.
Enable XSA in Apple Macintosh Print Driver
Mac OS X
1. Open a document to print and select [File] and then [Print].
2. From the Print Options Menu select [Printer Features].
3. Select the [Feature Sets] menu.
4. Select [JCL].
5. Select [Accounting] to enable it.
6. Print the document.
To Back-up XSA Data, Settings and Clone to Another Xerox Device
The Cloning feature enables you to copy settings, including XSA settings and account information, to a
file on your workstation or Server. You can then use this file to restore the data and settings on the
same device or to clone other devices. You can only clone XSA settings to another Xerox device that
supports the XSA feature.
Check that the device you want to clone settings to supports XSA
1. At a networked workstation, open the web browser and enter the IP address of the device that you
want to clone to in the Address bar, and press [Enter].
2. Click the [Properties] tab.
3. If prompted, enter the Administrator User ID and Password. The default is [admin] and [1111].
4. Click on the [Login] button.
5. Click on the [General Setup] link.
6. Select [Cloning] in the directory tree.
7. From the display of available check boxes, verify that Accounting is among them.
Click again on the [General Setup] link, then select [Configuration] in the directory tree, and
8.
verify that both devices have the same System Software Version.
To make a Back-up file
1. At your workstation, open the web browser and enter the IP address of the device with the
settings that you want to copy, in the Address bar, and press [Enter].
2. Click on the [Properties] tab.
3. If prompted, enter the Administrator User ID and Password. The default is [admin] and [1111].
4. Click on the [Login] button.
5. Click on the [General Setup] link.
Select [Cloning] in the directory tree.
6.
7. From the display of available groups, select the settings that you wish to clone. To clone all
features, click on the [Clone] button, or to customize the configuration file disable any of the
features by clicking the checkboxes next to the feature(s) and then click on the [Clone] button.
Right-click on the [.dlm] link that appears and select [Save Target As].
8.
Xerox Standard Accounting
Xerox ColorQube™ 9201/9202/9203
System Administrator Guide
295