Xerox ColorQube 9201 System Administrator Manual page 139

Configure Contexts for LDAP (Used when LDAP is enable via NetWare)
Contexts are used with the Authentication feature. The administrator can configure the device to
automatically add an authentication context to the Login Name provided by the user.
1. If you have already logged out of Internet Services, or closed your browser, at a networked
workstation, open the web browser and enter the IP address of the device in the Address or
Location field. Press [Enter].
2. Click the [Properties] tab.
3. If prompted, enter the Administrator User ID and Password. The default is [admin] and [1111].
4. Click on the [Login] button.
5. Click on the [Connectivity] link.
6. Click on the [Protocol] link.
7. Select [LDAP] in the directory tree.
a. Click on [Contexts] heading tab under the LDAP title.
Enter details in the [Default Login Context] field provided.
b.
c. Click on the [Apply] button, then click on the [OK] button when you see the message
"Properties have been successfully modified".
8. Select [Logout] in the upper right corner of your screen if you are still logged in as Administrator,
and click on the [Logout] button.
Configure Authorization Access (by groups) for LDAP
Used when Remotely on the Network is selected for Authorization.
LDAP server user groups can be used to control access to certain areas of the Xerox device. For example,
the LDAP server may contain a group of users called 'Admin'. You can configure the 'Admin' group on
the device so that the members of that group will have administrator access to the device. When a user
logs in at the device with their network authentication account, the device performs an LDAP look-up
to determine if the user is a member of any groups, (LDAP server will find members nested down five
levels of a group, for example, if LDAP searches for a user within the Admin Group, it may not find that
user, but may find another group, it will also look for the user in that group as well and so on). If the
LDAP server confirms that the user is a member of the 'Admin' group, the user will have administrator
access to the device.
1. If you have already logged out of Internet Services, or closed your browser, at a networked
workstation, open the web browser and enter the IP address (or Host Name) of the device in the
Address bar, and press [Enter].
2. Click the [Properties] tab.
3. If prompted, enter the Administrator User ID and Password. The default is [admin] and [1111].
4. Click on the [Login] button.
5. Click on the [Connectivity] link.
6. Click on the [Protocol] link.
7. Select [LDAP] in the directory tree.
8. Click on [Authorization Access] heading tab under the LDAP title.
Select the [User Roles] tab, use this tab to define the access groups that are authorized for
d.
the following roles:
Xerox ColorQube™ 9201/9202/9203
System Administrator Guide
Authentication
131