Windows 2000/2003 Server; Xerox Printer Installer - Xerox ColorQube 9201 System Administrator Manual

Print Drivers

Windows 2000/2003 Server

Xerox Printer Installer

This section provides instructions on how to install print driver manually. However, you can use Xerox
Printer Installer to discover the printer and install drivers.
To use the Xerox Printer Installer locate the Internet Services Print and Fax Drivers CD-ROM delivered
with your device and follow the instructions contained in the Internet Services Print and Fax Drivers
Guide for Microsoft Windows.
Information Checklist
Before starting the procedure, please ensure the following items are available or have been performed:
• Verify the device is configured with the correct IP Address, Subnet Mask, and Gateway Address
information by printing a Configuration Report.
To print a Configuration Report, go to the Device
a. Press the <Machine Status> button.
b. Touch the [Machine Information] tab.
c. Touch [Information Pages].
d. Touch [Configuration Report].
e. Touch [Print], then touch [Close].
• Locate the Internet Services Print and Fax Drivers CD. (This was delivered in the Internet Services
Network Services Pack with your device.) Review any README file contained with the print driver.
Windows Add Printer Wizard
1. At the Desktop, right-click the [My Network Places] / [Network Neighborhood] icon.
2. Select [Properties].
3. Click on the [Protocols] tab.
Verify that the [TCP/IP] protocol has been loaded.
4.
5. Select the [Services] tab and verify that [Microsoft TCP/IP Printing] is loaded. If this software is
not present, install it using the documentation provided by Microsoft. Then return to the next step
in this document.
Verify that Print Services for UNIX is loaded
1. From the [Start] menu, select [Settings].
2. Select [Control Panel].
Double-click [Add/Remove Programs].
3.
4. Select [Add/Remove Windows Components].
5. Select [Other Network File and Print Services].
6. Click [Details].
108 Xerox ColorQube™ 9201/9202/9203
System Administrator Guide