The Welcome Page - Xerox ColorQube 9201 System Administrator Manual
Xerox printers system administrator guide
Hide thumbs
Also See for ColorQube 9201:
- User manual (331 pages) ,
- Quick manual (16 pages) ,
- Secure installation and operation (12 pages)
Table of Contents
Advertisement
Device Connection and Quick Setup
•
MM/DD/YYYY
•
DD/MM/YYYY
•
YYYY/MM/DD
b.
Set the date by touching the left and right arrow buttons. Touch the [Next] button.
6.
The Time screen displays:
a.
Set the time by touching the left and right arrow buttons.
b.
Touch the [Display 24-Hour Clock] box to display 24-Hour format.
c.
Touch the [Next] button.
7.
The Quick Setup Home screen displays, this will display the Features and its Status, touch the
[Next] button
8.
The Device Setup Complete screen will display with the message 'Your Xerox machine is now:
Ready to Copy'. Touch the [Finished] button. The device will save the settings and reboot. If
enabled a configuration report will print.
The Welcome Page
A Welcome Page is enabled as the opening page of the device's Internet Services web pages. You can
click [Configure Device] on this Welcome Page, or click the Configuration Overview link on the
Properties tab, to go directly to the Install Wizards for configuring protocols and optional services.
A [I Have a Cloning File...] button on the Welcome Page lets you copy configuration settings from a
compatible Xerox system and apply them to this system.
To stop displaying the Welcome Page, check the [Don't Show Welcome Page Again] checkbox.
To access the Welcome Page or Properties tab of Internet Services, TCP/IP and HTTP must be enabled
on the device as described in the
Administrator Access for the Tools Menu
The <Log In/Out> button provides access to the Administrator Tools area. Administrator access is
required to change settings such as network information on the device.
1.
Press the <Log In/Out> button on the Control Panel.
2.
Enter the Administrator's User Name [admin], touch [Next], enter the Password [1111], then
touch [Enter].
3.
Press the <Machine Status> button.
4.
Touch the [Tools] tab.
Print a Configuration Report to Verify Current Device Settings
A Configuration Report will automatically print when the device is powered off, then on, during Power
Cable and Ethernet Cable installation. If necessary, perform the following steps:
1.
Press the <Machine Status> button on the device.
2.
Touch the [Machine Information] tab.
3.
Touch [Information Pages].
10
Xerox ColorQube™ 9201/9202/9203
System Administrator Guide
Introduction
on page 1 of this guide.
Advertisement
Table of Contents
Troubleshooting
