Xerox Secure Access - Xerox ColorQube 9201 System Administrator Manual

Authentication
b. Select the required [EAP] type from the [Authentication Method] drop-down menu.
c. Enter the [User Name (Device Name)] and [Password] required by your authentication
switch and server.
d. Click on the [Apply] button, then click on the [OK] button when you see the message
"Properties have been successfully modified".
7. Select [Logout] in the upper right corner of your screen if you are still logged in as Administrator,
and click on the [Logout] button.

Xerox Secure Access

System Administrators can configure the device so that users must be authenticated and authorized
before they can access specific services or areas. Xerox Secure Access provides a means of
authenticating users via an authentication server and optional card reader.
For further information Xerox Secure Access, refer to
Information Checklist
Before starting the procedure, please ensure the following items are available or have been performed:
• Ensure that the device is fully functional on the network. TCP/IP and HTTP protocols must be
configured so that Internet Services can be accessed.
• Ensure that the Xerox Partner authentication solution (Secure Access Server, Controller, and Card
Reader) is installed and communicating with the device. Follow the installation instructions from
the manufacturer of the authentication solution to correctly set the devices up. Make sure to
securely mount any external user authenticating devices to the device.
• Ensure that SSL (Secure Sockets Layer) is configured on the device. The Xerox Partner
authentication solution communicates with the device via HTTPS.
• (Optional) Ensure that Network Accounting is configured if you want the device to send user
account information to a Network Accounting server. For instructions, refer to the Network
Accounting section of this guide.
• You may also need another Authentication Server (running LDAP in an ADS environment, for
example) to communicate with the Secure Access Server providing that server with user
credentialing information. A second Authentication Server will be necessary for web user interface
Authentication, if this feature is additionally desired.
• You will need to configure LDAP communications on the device as stated in the LDAP/LDAPS topic
in the Authentication section of this guide.
Configure Authentication
1. At your Workstation, open the web browser and enter the IP address (or Host Name) of the device
in the Address bar, and press [Enter].
2. Click the [Properties] tab.
3. If prompted, enter the Administrator User ID and Password. The default is [admin] and [1111].
4. Click on the [Login] button.
5. Click on the [Security] link.
6. Click on the [Access Rights] link.
136 Xerox ColorQube™ 9201/9202/9203
System Administrator Guide
Xerox Secure Access on page 301