Software Upgrade Via Network Connection - Xerox ColorQube 9201 System Administrator Manual

c. Enter a name (up to 256 characters) for the default [TRAP Community Name]. The default is
SNMP_trap.
Note: The Default TRAP community name is used to specify the default community name for all
traps generated by this device.
d. Click [Save], to apply the changes or [Undo] to return to the previous settings.
For Edit SNMP v1/v2c Properties:
e. Use this page to configure Authentication Password and Privacy Password for the
Administrator Account.
f. In the Administrator Account area, check the [Account Enabled] checkbox to create an
administrator account that can be used to provide more extensive access to the objects on
the printer.
g. Enter details for Authentication Password and Privacy Password as desired.
h. Check the [Select to save new password] checkbox.
i. In the Print Drivers / Remote Clients Account area, check on the [Account Enabled]
checkbox, to create an account for bi-directional Print Drivers and Xerox Remote Clients.
Note: This account allows Xerox Clients and Drivers a limited amount of access to objects on the
device. If the device does not have SNMP v1/v2c enabled, and does not have this account
enabled, Xerox SNMP based clients will not be able to communicate with it. The default passwords
should be used, unless the passwords have been changed on the client.
j. Click [Save], to apply the changes or [Undo] to return to the previous settings.
10. In the Authentication Failure Generic Traps area, check the [Enabled] checkbox if you want the
machine to generate a trap for every SNMP request that is received by the machine which
contains an invalid community name.
11. Click on the [Apply] button to accept the changes or [Undo] return to the previous settings.
12. Click on the [OK] button when you see the message "Properties have been successfully
modified".

Software Upgrade via Network Connection

WARNING:
This procedure will delete any current jobs in the device print queue and prevent
further jobs from printing until the upgrade has completed. If you wish to preserve these jobs,
allow them to complete before upgrading your software. All configured network settings and
installed options will be retained by the device after the Software Upgrade process.
Prepare for the Upgrade
Obtain the new software upgrade file for your device from the www.xerox.com website or from your
Xerox Customer Support Representative. Download the upgrade file to a local or network drive. You will
be able to delete the file after the upgrade procedure.
It is important to obtain the correct upgrade file for your device. Determine the software version you
are currently running, as follows.
1. At your Workstation, open the web browser and enter the IP address of the device in the Address
bar, and press [Enter].
Xerox ColorQube™ 9201/9202/9203
System Administrator Guide
General Setup
49