Xerox ColorQube 9201 System Administrator Manual page 58

General Setup
2. Click the [Properties] tab.
3. If prompted, enter the Administrator User ID and Password. The default is [admin] and [1111].
4. Click on the [Login] button.
5. Click on the [General Setup] link.
6. Select [Configuration Report] in the directory tree, scroll down to the Common User Data section
to see your System Software Version.
Upgrades
The Software Upgrade feature allows the customers to upgrade the device software as requested by a
Xerox Customer Support Center Representative, without needing a Customer Service Representative to
be present.
To enable or disable software upgrades on the device, follow the procedure below:
1. At your Workstation, open the web browser and enter the IP address of the device in the Address
bar, and press [Enter].
2. Click the [Properties] tab.
3. If prompted, enter the Administrator User ID and Password. The default is [admin] and [1111].
4. Click on the [Login] button.
5. Click on the [General Setup] link.
6. Click on the [Machine Software] link.
7. Select [Upgrades] in the directory tree.
8. In the Upgrades area, check the [Enabled] checkbox to enable Machine Software upgrade.
9. Click on the [Apply] button.
Manual Upgrade
1. At your Workstation, open the web browser and enter the IP address of the device in the Address
bar, and press [Enter].
2. Click on the [Properties] tab.
3. If prompted, enter the Administrator User ID and Password. The default is [admin] and [1111].
4. Click on the [Login] button.
5. Click on the [General Setup] link.
6. Click on the [Machine Software] link.
7. Select [Manual Upgrade] in the directory tree.
Note: Note the current software level in the Last Successful Upgrade box.
In the Manual Upgrade area, click on [Browse] to locate the software upgrade file obtained
8.
earlier.
9. Select the file and click [Open].
10. Click on the [Install Software] button to proceed with the upgrade. The file will be sent to the
printer and will disable the printing functionality. The web browser will become inactive and you
will not be able to access the device via this method until the upgrade has completed and the
device has rebooted. The upgrade should take no longer than 15 minutes.
50 Xerox ColorQube™ 9201/9202/9203
System Administrator Guide