Windows Xp; Xerox Printer Installer - Xerox ColorQube 9201 System Administrator Manual

Windows XP

Note: You can use the Internet Services to configure the Print Driver in this environment.

Xerox Printer Installer

This section provides instructions on how to install print driver manually. However, you can use Xerox
Printer Installer to discover the printer and install drivers.
To use the Xerox Printer Installer locate the Internet Services Print and Fax Drivers CD-ROM delivered
with your device and follow the instructions contained in the Internet Services Print and Fax Drivers
Guide for Microsoft Windows.
Information Checklist
Before starting the procedure, please ensure the following items are available or have been performed:
• Verify the device is configured with the correct IP Address, Subnet Mask, and Gateway Address
information by printing a Configuration Report.
To print a Configuration Report, go to the Device
a. Press the <Machine Status> button.
b. Touch the [Machine Information] tab.
c. Touch [Information Pages].
d. Touch [Configuration Report].
e. Touch [Print], then touch [Close].
• Locate the Internet Services Print and Fax Drivers CD. (This was delivered in the Internet Services
Network Services Pack with your device.) Review any README file contained with the print driver.
To install print driver on Windows XP choose one of the following options:
• Connect to an existing print queue already created on a network server.
• Create a new print queue on the Windows XP workstation.
Connect to an Existing Print Queue
1. At the Windows XP Workstation verify that the TCP/IP protocol stack is loaded: select [Start],
right-click the [My Network Places] icon, and select [Properties].
2. Right-click on the [Local Area Connection] icon. Select [Properties].
3. Verify that the Internet Protocol (TCP/IP) protocol has been loaded (it may be necessary to scroll
down the list). If this software is not present, install it using the documentation provided by
Microsoft. Then return to the next step in this document.
4. From the [Start] menu select [Printers and Faxes].
5. Select [Add a Printer].
6. The Welcome Page will display, click on [Next].
7. Verify that [A network printer, or a printer attached to another computer] is selected, and click
on [Next].
Xerox ColorQube™ 9201/9202/9203
System Administrator Guide
Print Drivers
113