Xerox ColorQube 9201 System Administrator Manual page 60

General Setup
9. Select either [Hourly] or [Daily] to activate the feature accordingly, in the Refresh Start Time
section.
10. If [Daily] has been selected, enter the required time for the upgrade to be performed.
11. Select either [IPv4 Address], [IPv6 Address] or [Host Name] for Protocol.
12. If IP Address is selected, enter details in the IP address and Port of the server where the software
upgrade file (obtained earlier) is located, in the [IP Address] and [Port] field (the default port
number is 21) and if Host Name is selected, enter details in the [Host Name] and [Port] field (the
default port number is 21).
13. Enter the path to the upgrade file on the server in the [Directory Path] field.
14. Enter the [Login Name] and [Password] for the server, retype the password.
15. Click on the [Apply] button to accept the changes.
The upgrade will now be performed automatically on the device at the time specified. Once the
upgrade process starts network connectivity with the device will be unavailable, including access from
Internet Services. The upgrade progress can be monitored from the device screen interface.
You have completed the steps to automatically upgrade the device software.
52 Xerox ColorQube™ 9201/9202/9203
System Administrator Guide