Restore Jobs - Xerox ColorQube 9201 System Administrator Manual
Xerox printers system administrator guide
Hide thumbs
Also See for ColorQube 9201:
- User manual (331 pages) ,
- Quick manual (16 pages) ,
- Secure installation and operation (12 pages)
Table of Contents
Advertisement
6.
Click on the [Reprint Saved Jobs] link.
7.
Select [Backup Jobs] in the directory tree.
8.
In the Settings area:
a.
Select FTP from the [Protocol] drop-down menu.
Note:
Only FTP is available for the Protocol.
b.
Select either [IPv4 Address], [IPv6 Address] or [Host Name].
c.
Enter the IP Address and Port or Host Name and Port of the Repository Server.
d.
Type in the path to the location of the repository server in the [Document Path] field. For
example: /(directory name)/(directory name).
e.
Enter the file name for the backup in the [File Name] field. This name will be appended onto
the end of the document path.
f.
Enter the system login name in the [Login Name] and the password in the [Password] field.
g.
Re-enter the password in the [Retype Password] field.
h.
Check the [Select to save new password] checkbox, if you want to change the password for
an existing Login Name.
9.
Click on the [Start] button to begin the backup.
Restore Jobs
Use the Restore Jobs feature to restore the saved jobs stored on a repository.
Note:
When Saved Jobs are restored, all current Saved Jobs data will be deleted. The restore
process may take considerable time to complete depending on how many files were backed up. If
the restore is aborted, the Default Public Folder will be empty.
At your Workstation:
1.
Open the web browser and enter the IP address of the device in the Address bar, and press
[Enter].
2.
Click the [Properties] tab.
3.
If prompted, enter the Administrator User ID and Password. The default is [admin] and [1111].
4.
Click on the [Login] button.
5.
Click on the [Services] link.
6.
Click on the [Reprint Saved Jobs] link.
7.
Select [Restore Jobs] in the directory tree.
8.
In the Settings area:
a.
Select FTP from the [Protocol] drop-down menu.
Note:
Only FTP is available for the Protocol.
b.
Select the method by which the repository server is identified. Select either [IPv4 Address],
[IPv6 Address] or [Host Name].
c.
Enter the IP Address and Port or Host Name and Port of the Repository Server.
d.
Type in the path to the location of the repository server in the [Document Path] field. For
example: /(directory name)/(directory name).
Xerox ColorQube™ 9201/9202/9203
System Administrator Guide
Reprint Saved Jobs
277
Advertisement
Table of Contents
Troubleshooting
