Xerox ColorQube 9201 System Administrator Manual page 91

9. Click [Next].
10. Click [Create a New Port].
11. Select [AppleTalk Printing Devices] and click [Next].
12. In the Available AppleTalk Printing Devices box, click the printer you want to connect to. It may be
necessary to double-click the required Zone to locate the printer. Click [OK].
Note: You may be asked whether you want to capture the AppleTalk print device. If you are
prompted to do this and you are unsure how to respond, click the Help button and read the help
file for an explanation of capturing AppleTalk print devices.
Note: Capturing the printer may prevent other computers from printing to this printer. For more
information refer to Microsoft.
13. Click [Have Disk]. Load the Internet Services Print and Fax Drivers CD into your CD drive.
14. Click [Browse] and locate the CD drive.
15. Locate the folder containing print drivers on the CD and select the required Windows 2000 print
driver.
16. Select [Open].
17. Select [Open] again, if necessary.
18. Select [OK].
19. Select your printer model from the list and click [Next].
20. Type a name for the printer (or accept the default name), and then click [Next].
21. If you want this to be your default printer click [Yes].
22. Click [Next].
23. If you want to share this printer from your computer, click [Share As:]. Enter a share name (or
accept the default name), then click [Next].
24. If you want to print a test page, click [Yes], then click [Finish].
Xerox ColorQube™ 9201/9202/9203
System Administrator Guide
Network Installation
83