Xerox ColorQube 9201 System Administrator Manual page 296

WSD (Web Services for Devices)
At your workstation:
1. Open the web browser and enter the IP address of the device in the Address bar, and press
[Enter].
2. Click the [Properties] tab.
3. If prompted, enter the Administrator User ID and Password. The default is [admin] and [1111].
4. Click on the [Login] button.
5. Click on the [Connectivity] link.
6. Click on the [Protocol].
7. Click on the [HTTP] in the directory tree.
8. The HTTP screen displays, select the [Web Services] tab under the heading.
a. In the Device Discovery area check the following individual services checkbox you want to
enable or uncheck the services checkbox to disable a services:
• WS-Discovery - supports the discovery of services in an ad-hoc network with a minimum
of networking services, for example, no DNS, UDDI or other directory services. It does
this by announcing or advertising the existence of the printer and its services on the
network when it becomes available, and announcing its departure when unavailable.
When disabled, WSD does not respond to WS-Discovery requests.
The default port number is 3702.
Note: This does not disable or prevent access to Internet Services.
• WS-Discovery Multicast - allows the printer to use the Multicast protocol to respond and
announce. Multicast Discovery communicates the service URLs provided by the printer to
client computers on the network. WS-Discovery must be enabled to make this feature
available for selection.
When disabled, WS-Discovery Multicast is unavailable on the printer. WS-Discovery
Multicast should be disabled if your network utilizes a discovery proxy to handle
multicast group communication and reduce overall WS-Discovery traffic.
The assigned port number is identical to that of WS-Discovery.
• WS-Print - this allows the printer's print capabilities to be announced through WS-
Discovery.
When disabled, WS-Print service is unavailable on the printer. When disabled, print
capabilities will not be discoverable by any network client and no printing is possible
through the WSD port.
The default port number is 53303.
b. Each active WSD service must be assigned a unique port number. An assigned port number
can be changed if your network's WSD implementation mandates it. Under normal
conditions, these default assignments should not be changed.
c. Click on the [Apply] button.
288 Xerox ColorQube™ 9201/9202/9203
System Administrator Guide