Xerox ColorQube 9201 System Administrator Manual page 122
Xerox printers system administrator guide
Hide thumbs
Also See for ColorQube 9201:
- User manual (331 pages) ,
- Quick manual (16 pages) ,
- Secure installation and operation (12 pages)
Table of Contents
Advertisement
Print Drivers
8.
The Specify a Printer screen will appear. Select on of the following:
•
[Connect to this printer] if you know the name of the server and printer.
•
[Find a printer in the directory] to browse for the print queue created on your server.
Click on [Next].
9.
Select the printer and click [Next].
10. Decide whether or not you want to make this printer your default printer, then click [Next].
11. Click [Finish]. The printer will download to the Windows XP workstation.
12. Once the print driver has installed, open an application on the workstation and print a test page to
verify operation.
Configure the Print Driver
1.
From the [Start] menu select [Printers and Faxes].
2.
Right click on the printer icon and select [Properties]. Use the available tabs to set the printing
defaults. Additional settings may be accessed by clicking the [Printing Preferences] button on the
General tab.
3.
Click on the [Apply] button, then [OK].
Create a New Print Queue on Windows XP
1.
Obtain the Print Driver for your operating system.
2.
Verify that Print Services for UNIX is loaded: from the [Start] menu, select [Control Panel].
3.
Double-click [Add/Remove Programs].
4.
Select [Add/Remove Windows Components].
5.
Scroll down until you see [Other Network File and Print Services].
6.
Click the [Details] button.
7.
Check the checkbox to add [Print Services for UNIX] if not already installed and click [OK].
Click [Next].
8.
Add the Printer
1.
From the [Start] menu select [Printers and Faxes]. The Vista path is Start\Control
Panel\Printer(s).
2.
Click on [Add a Printer], then [Next].
3.
Select [Local Printer attached to this computer].
4.
If already selected, deselect [Automatically detect and install my Plug and Play printer].
5.
Click [Next].
6.
Select [Create a new port].
7.
Select [LPR] from the Type of Port pull down menu, then click [Next].
8.
Enter the IP Address of the printer.
Enter a name for the print queue and click [OK].
9.
10. You will be prompted for a print driver. Select [Have Disk] and click on [Browse] to the location of
your print driver.
11. Select the required driver then click [Open].
114
Xerox ColorQube™ 9201/9202/9203
System Administrator Guide
Advertisement
Table of Contents
Troubleshooting
