Command Line Interface Reference for the ProSafe 7200RS Series Layer-2 Stackable Switches
14.5.1 router ospf
Use this command to enter Router OSPF mode.
Format
Mode
14.5.2 enable (OSPF)
This command resets the default administrative mode of OSPF in the router (active).
Default
Format
Mode
14.5.2.1 no enable (OSPF)
This command sets the administrative mode of OSPF in the router to inactive.
Format
Mode
14.5.3 ip ospf
This command enables OSPF on a router interface.
Default
Format
Mode
14.5.3.1 no ip ospf
This command disables OSPF on a router interface.
Format
Mode
14-26
router ospf
Global Config
enabled
enable
Router OSPF Config
no enable
Router OSPF Config
disabled
ip ospf
Interface Config
no ip ospf
Interface Config
v1.0, October 2008
Routing Commands