No Lldp Med Confignotification; Lldp Med Transmit-Tlv; No Lldp Med Transmit-Tlv; Lldp Med Faststartrepeatcount - NETGEAR GSM7248R Command Line Interface Reference Manual

Command Line Interface Reference for the ProSafe 7200RS Series Layer-2 Stackable Switches

17.2.4 no lldp med confignotification

This command is used to disable notifications. The 'all' option is also available in the
Global config mode to disable on all the ports.
Format
Mode
Format
Mode

17.2.5 lldp med transmit-tlv

This command is used to specify which optional type length values (TLVs) in the
802.1AB MED set are transmitted in the LLDPDUs. The 'all' option is also available in
the Global config mode to enable on all the ports.
Format
Mode
Format
Mode

17.2.6 no lldp med transmit-tlv

This command is used to remove an optional TLV from the LLDPDUs. The 'all' option is
also available in the Global config mode to disable on all the ports.
Format
Mode
Format
Mode

17.2.7 lldp med faststartrepeatcount

This command is used to to set the value of the fast start repeat count. [count] is then
umber of LLDP PDUs that will be transmitted when the product is enabled. The range is 1
to 10.
Format
Mode
17-10
no lldp med confignotification
Global Config
lldp med confignotification
Interface Config
lldp med transmit-tlv
Global Config
lldp med transmit-tlv [capabilities] [ex-pd]
[ex-pse] [inventory] [location] [network-policy]
Interface Config
no lldp med transmit-tlv
Global Config
no lldp med transmit-tlv [capabilities] [ex-pd]
[ex-pse] [inventory] [location] [network-policy]
Interface Config
lldp med faststartrepeatcount [count]
Global Config
v1.0, October 2008
all
all
all
LLDP and LLDP-MED Commands