No Authorization Network Radius; Tacas+ Commands; Tacads-Server Host; No Tacacs-Server Host - NETGEAR GSM7248R Command Line Interface Reference Manual

Command Line Interface Reference for the ProSafe 7200RS Series Layer-2 Stackable Switches

11.3.4 no authorization network radius

This command is used to disable the switch to accept vlan assignment by the radius server.
Format
Mode

11.4 TACAS+ Commands

TACACS+ provides access control for networked devices via one or more centralized
servers. Similar to RADIUS, this protocol simplifies authentication by making use of a
single database that can be shared by many clients on a large network. TACACS+ is based
on the TACACS protocol (described in RFC1492) but additionally provides for separate
authentication, authorization, and accounting services. The original protocol was UDP
based with messages passed in clear text over the network; TACACS+ uses TCP to ensure
reliable delivery and a shared key configured on the client and daemon server to encrypt
all messages.

11.4.1 tacads-server host

This command is used to configure a TACACS+ server. This command enters into the
TACACS+ configuration mode. The <ip-address|hostname> parameter is the IP address or
hostname of the TACACS+ server. To specify multiple hosts, multiple tacacs-server host
commands can be used.
Format
Mode

11.4.2 no tacacs-server host

This command is used to delete the specified hostname or IP address. The
<ipaddress|hostname> parameter is the IP address of the TACACS+ server.
Format
Mode
11-22
no authorization network radius
Global Config
tacacs-server host <ip-address | hostname>
Global Config
no tacacs-server host <ip-address | hostname>
Global Config
Port-Based Access and Authentication Commands
v1.0, October 2008