Clear Port-Channel; Port Lacpmode; Port Lacpmode All - NETGEAR GSM7248R Command Line Interface Reference Manual

Command Line Interface Reference for the ProSafe 7200RS Series Layer-2 Stackable Switches
12.1.4.1 no port-channel
This command deletes a port-channel (LAG).
Format
Mode

12.1.5 clear port-channel

Use this command to clear all configured port channels.
Format
Mode

12.1.6 port lacpmode

This command enables Link Aggregation Control Protocol (LACP) on a port.
Default
Format
Mode
12.1.6.1 no port lacpmode
This command disables Link Aggregation Control Protocol (LACP) on a port.
Format
Mode

12.1.7 port lacpmode all

This command enables Link Aggregation Control Protocol (LACP) on all ports.
Format
Mode
12.1.7.1 no port lacpmode all
This command disables Link Aggregation Control Protocol (LACP) on all ports.
Format
Mode
Port-Channel/LAG (802.3ad) Commands
no port-channel {<logical unit/slot/port> | all}
Global Config
clear port-channel
Privileged EXEC
enabled
port lacpmode
Interface Config
no port lacpmode
Interface Config
port lacpmode all
Global Config
no port lacpmode all
Global Config
v1.0, October 2008
12-3