Tacacs-Server Key; No Tacacs-Server Key; Tacacs-Server Timeout; No Tacacs-Server Timeout - NETGEAR GSM7248R Command Line Interface Reference Manual

Command Line Interface Reference for the ProSafe 7200RS Series Layer-2 Stackable Switches

11.4.3 tacacs-server key

This command is used to set the authentication and encryption key for all TACACS+
communications between the switch and the TACACS+ daemon. The <key-string>
parameter has a range of 0 - 128 characters and specifies the authentication and encryption
key for all TACACS Communications between the switch and the TACACS+ server. This
key must match the key used on the TACACS+ daemon.
In the show running config command's display, these secret keys are displayed in
encrypted format. You cannot show these keys in plain text format.
Format
Mode

11.4.4 no tacacs-server key

This command is used to disable the authentication and encryption key for all TACACS+
communications between the switch and the TACACS+ daemon.
Format
Mode

11.4.5 tacacs-server timeout

This command is used to set the timeout value for communication with the TACACS+
servers. The <timeout> parameter has a range of 1-30 and is the timeout value in seconds.
Format
Mode

11.4.6 no tacacs-server timeout

This command is used to restore the default timeout value for all TACACS servers.
Format
Mode
Port-Based Access and Authentication Commands
tacacs-server key [<key-string> | encrypted <key-
string>]
Global Config
no tacacs-server key
Global Config
tacacs-server timeout <timeout>
Global Config
no tacacs-server timeout
Global Config
v1.0, October 2008
11-23