Show Lldp Remote-Device; Show Lldp Remote-Device Detail - NETGEAR GSM7248R Command Line Interface Reference Manual

Command Line Interface Reference for the ProSafe 7200RS Series Layer-2 Stackable Switches
Transmit Total
Receive Total
Discards
Errors
Ageouts
TVL Discards
TVL Unknowns
TVL MED
TVL 802.1
TVL 802.3

17.1.20 show lldp remote-device

This command displays summary information about remote devices that transmit current
LLDP data to the system. You can show information about LLDP remote data received on
all ports or on a specific port.
Format
Mode
Local Interface
Chassis ID
Port ID
System Name

17.1.21 show lldp remote-device detail

This command displays display detailed information about remote devices that transmit
current LLDP data to an interface on the system.
Format
17-6
Total number of LLDP packets transmitted on the port.
Total number of LLDP packets received on the port.
Total number of LLDP frames discarded on the port for any
reason.
The number of invalid LLDP frames received on the port.
Total number of times a complete remote data entry was
deleted for the port because the Time to Live interval expired.
The number of TLVs discarded
Total number of LLDP TLVs received on the port where the
type value is in the reserved range, and not recognized.
Total number of LLDP MED TLVs received on the local
ports.
Total number of 802.1 LLDP TLVs received on the local
ports.
Total number of 802.3 LLDP TLVs received on the local
ports.
show lldp remote-device [<unit/slot/port> | all]
Privileged EXEC
The interface that received the LLDPDU from the remote
device.
The ID of the remote device.
The port number that transmitted the LLDPDU.
The system name of the remote device.
show lldp remote-device detail [<unit/slot/port>]
v1.0, October 2008
LLDP and LLDP-MED Commands