Auto-Negotiate All; Description - NETGEAR GSM7248R Command Line Interface Reference Manual

Command Line Interface Reference for the ProSafe 7200RS Series Layer-2 Stackable Switches
4.1.5.1 no auto-negotiate
This command disables automatic negotiation on a port.
Note: Automatic sensing is disabled when automatic negotiation is disabled.
Format
Mode

4.1.6 auto-negotiate all

This command enables automatic negotiation on all ports. The default value is enable.
Format
Mode
4.1.6.1 no auto-negotiate all
This command disables automatic negotiation on all ports.
Format
Mode

4.1.7 description

Use this command to create an alpha-numeric description of the port. The length can be up
to 64 characters.
Format
Mode
Port and System Setup Commands
no auto-negotiate
Interface Config
auto-negotiate all
Global Config
no auto-negotiate all
Global Config
<description>
description
Interface Config
v1.0, October 2008
4-3