Drop; Conform-Color; Class - NETGEAR GSM7248R Command Line Interface Reference Manual

Command Line Interface Reference for the ProSafe 7200RS Series Layer-2 Stackable Switches
Format
Mode
Incompatibilities Drop

13.4.3 drop

This command specifies that all packets for the associated traffic stream are to be dropped
at ingress.
Format
Mode
Incompatibilities Assign Queue, Mark (all forms), Police

13.4.4 conform-color

This command is used to enable color-aware traffic policing and define the conform-color
class map. Used in conjunction with the police command where the fields for the conform
level are specified. The
class map.
Note: This command may only be used after specifying a police command for the
Format
Mode

13.4.5 class

This command creates an instance of a class definition within the specified policy for the
purpose of defining treatment of the traffic class through subsequent policy attribute
statements. The
Note: This command causes the specified policy to create a reference to the class
13-18
assign-queue <queueid>
Policy-Class-Map Config
drop
Policy-Class-Map Config
<class-map-name>
policy-class instance.
conform-color <class-map-name>
Policy-Class-Map Config
is the name of an existing DiffServ class.
<classname>
definition.
v1.0, October 2008
parameter is the name of an existing Diffserv
Quality of Service (QoS) Commands