Router Ospf; Enable (Ospf); Ip Ospf - NETGEAR GSM7328Sv1 - ProSafe 24+4 Gigabit Ethernet L3 Managed Stackable Switch Cli Reference Manual

Command Line Interface Reference for the ProSafe 7300S Series Layer-3 Stackable Switches,

14.5.1 router ospf

Use this command to enter Router OSPF mode.
Format
Mode

14.5.2 enable (OSPF)

This command resets the default administrative mode of OSPF in the router (active).
Default
Format
Mode
14.5.2.1 no enable (OSPF)
This command sets the administrative mode of OSPF in the router to inactive.
Format
Mode

14.5.3 ip ospf

This command enables OSPF on a router interface.
Default
Format
Mode
14.5.3.1 no ip ospf
This command disables OSPF on a router interface.
Format
Mode
14-26
router ospf
Global Config
enabled
enable
Router OSPF Config
no enable
Router OSPF Config
disabled
ip ospf
Interface Config
no ip ospf
Interface Config
v4.1, October 2008
Routing Commands