Ip Dhcp Relay Information Option; Bootpdhcprelay - NETGEAR GSM7248R Command Line Interface Reference Manual

Command Line Interface Reference for the ProSafe 7200RS Series Layer-2 Stackable Switches

7.4.1 ip dhcp relay information option

This command enables option 82 (RFC 3046) for BootP/DHCP Relay on the system.
Once enabled, the DHCP request forwarded to the DHCP server will contain two optional
fields: Circuit ID and Remote ID. The circuit ID option contains the port information
where the DHCP client request originated. The remote ID option contains the MAC
address of the relay agent (the switch management CPU's own MAC address).
Default
Format
Mode
7.4.1.1 no ip dhcp relay information option
This command disables the relay information option mode for BootP/DHCP Relay on the
system.
Format
Mode

7.4.2 bootpdhcprelay

This command enables the forwarding of relay requests for BootP/DHCP Relay on the
system.
Default
Format
Mode
7.4.2.1 no bootpdhcprelay enable
This command disables the forwarding of relay requests for BootP/DHCP Relay on the
system.
Format
Mode
DHCP Commands
disabled
ip dhcp relay information option
Global Config
no ip dhcp relay information option
Global Config
disabled
bootpdhcprelay
Global Config
no bootpdhcprelay enable
Global Config
v1.0, October 2008
7-15