Common Parameter Values - NETGEAR GSM7248R Command Line Interface Reference Manual

Command Line Interface Reference for the ProSafe 7200RS Series Layer-2 Stackable Switches

2.2.2.1 Common Parameter Values

Parameter values might be names (strings) or numbers. To use spaces as part of a name
parameter, enclose the name value in double quotes. For example, the expression "System
Name with Spaces" forces the system to accept the spaces. Empty strings (" ") are not
valid user-defined strings. Table 2-3 describes common parameter values and value
formatting.
Table 2-3. Parameter Descriptions
Parameter
ipaddr
macaddr
areaid
routerid
Interface or unit/slot/port
Logical Interface
Character strings
2-4
Description
This parameter is a valid IP address. You can enter the IP address
in the following formats:
a (32 bits)
a.b (8.24 bits)
a.b.c (8.8.16 bits)
(8.8.8.8)
a.b.c.d
In addition to these formats, the CLI accepts decimal, hexidecimal
and octal formats through the following input formats (where n is
any valid hexidecimal, octal or decimal number):
0xn (CLI assumes hexidecimal format)
0n (CLI assumes octal format with leading zeros)
n (CLI assumes decimal format)
The MAC address format is six hexadecimal numbers separated by
colons, for example 00:06:29:32:81:40.
Enter area IDs in dotted-decimal notation (for example, 0.0.0.1). An
area ID of 0.0.0.0 is reserved for the backbone. Area IDs have the
same format as IP addresses but are distinct from IP addresses.
You can use the IP network number of the sub-netted network for
the area ID.
Enter the value of <routerid> in dotted-decimal notation, such as
0.0.0.1. A router ID of 0.0.0.0 is invalid.
Valid slot and port number separated by forward slashes. For
example, 0/1 represents slot number 0 and port number 1.
Logical slot and port number. This is applicable in the case of a
port-channel (LAG). You can use the logical unit/slot/port to
configure the port-channel.
Use double quotation marks to identify character strings, for
example, "System Name with Spaces". An empty string ("") is not
valid.
v1.0, October 2008
Overview