NETGEAR GSM7248R Command Line Interface Reference Manual page 366

Command Line Interface Reference for the ProSafe 7200RS Series Layer-2 Stackable Switches
Packets
Transmitted
Successfully
Transmit Errors
Transmit
Discards
18-10
Max Info - The maximum size of the Info (non-MAC) field
that this port will receive or transmit.
Total - The number of frames that have been transmitted by
this port to its segment.
Unicast Packets Transmitted - The total number of packets
that higher-level protocols requested be transmitted to a sub-
network-unicast address, including those that were discarded
or not sent.
Multicast Packets Transmitted - The total number of pack-
ets that higher-level protocols requested be transmitted to a
Multicast address, including those that were discarded or not
sent.
Broadcast Packets Transmitted - The total number of pack-
ets that higher-level protocols requested be transmitted to the
Broadcast address, including those that were discarded or not
sent.
Total Errors - The sum of Single, Multiple, and Excessive
Collisions.
Tx FCS Errors - The total number of packets transmitted
that had a length (excluding framing bits, but including FCS
octets) of between 64 and 1518 octets, inclusive, but had a
bad Frame Check Sequence (FCS) with an integral number of
octets
Oversized - The total number of frames that exceeded the
max permitted frame size. This counter has a max increment
rate of 815 counts per sec. at 10 Mb/s.
Underrun Errors - The total number of frames discarded
because the transmit FIFO buffer became empty during frame
transmission.
Total Discards - The sum of single collision frames dis-
carded, multiple collision frames discarded, and excessive
frames discarded.
Single Collision Frames - A count of the number of success-
fully transmitted frames on a particular interface for which
transmission is inhibited by exactly one collision.
v1.0, October 2008
System Maintenance Commands