NETGEAR GSM7248R Command Line Interface Reference Manual page 369

Layer-2 stackable switches with static routing, software version 7.3
Hide thumbs Also See for GSM7248R:
Table of Contents

Advertisement

Command Line Interface Reference for the ProSafe 7200RS Series Layer-2 Stackable Switches
Octets Transmitted - The total number of octets transmitted
out of the interface, including framing characters.
Packets Transmitted without Errors - The total number of
packets transmitted out of the interface.
Unicast Packets Transmitted - The total number of packets
that higher-level protocols requested be transmitted to a sub-
network-unicast address, including those that were discarded
or not sent.
Multicast Packets Transmitted - The total number of pack-
ets that higher-level protocols requested be transmitted to a
Multicast address, including those that were discarded or not
sent.
Broadcast Packets Transmitted - The total number of pack-
ets that higher-level protocols requested be transmitted to the
Broadcast address, including those that were discarded or not
sent.
Transmit Packets Discarded - The number of outbound
packets which were chosen to be discarded even though no
errors had been detected to prevent their being deliverable to
a higher-layer protocol. A possible reason for discarding a
packet could be to free up buffer space.
Most Address Entries Ever Used - The highest number of
Forwarding Database Address Table entries that have been
learned by this switch since the most recent reboot.
Address Entries in Use - The number of Learned and static
entries in the Forwarding Database Address Table for this
switch.
Maximum VLAN Entries - The maximum number of Vir-
tual LANs (VLANs) allowed on this switch.
Most VLAN Entries Ever Used - The largest number of
VLANs that have been active on this switch since the last
reboot.
Static VLAN Entries - The number of presently active
VLAN entries on this switch that have been created statically.
Dynamic VLAN Entries - The number of presently active
VLAN entries on this switch that have been created by
GVRP registration.
System Maintenance Commands
18-13
v1.0, October 2008

Advertisement

Table of Contents
loading

This manual is also suitable for:

Prosafe 7200rs series

Table of Contents