Show Lldp Local-Device - NETGEAR GSM7248R Command Line Interface Reference Manual

Command Line Interface Reference for the ProSafe 7200RS Series Layer-2 Stackable Switches
Mode
Local Interface
Chassis ID
Subtype
Chassis ID
Port ID Subtype
Port ID
System Name
System
Description
Port Description
System
Capabilities
Supported
System
Capabilities
Enabled
Time To Live

17.1.22 show lldp local-device

This command displays summary information about the advertised LLDP local data. This
command can display summary information or detail for each interface.
Format
Mode
Interface
Port ID
Port Description
LLDP and LLDP-MED Commands
Privileged EXEC
The interface that received the LLDPDU from the remote
device.
The type of identification used in the Chassis ID field.
The chassis of the remote device.
The type of port on the remote device.
The port number that transmitted the LLDPDU.
The system name of the remote device.
Describes the remote system by identifying the system name
and versions of hardware, operating system, and networking
software supported in the device.
Describes the port in an alpha-numeric format. The port
description is configurable.
Indicates the primary function(s) of the device.
Shows which of the supported system capabilities are
enabled.
The amount of time (in seconds) the remote device's informa-
tion received in the LLDPDU should be treated as valid
information.
show lldp local-device [<unit/slot/port> | all]
Privileged EXEC
The interface in a unit/slot/port format.
The port ID associated with this interface.
The port description associated with the interface.
v1.0, October 2008
17-7