NETGEAR GSM7248R Command Line Interface Reference Manual page 360

Command Line Interface Reference for the ProSafe 7200RS Series Layer-2 Stackable Switches
Packets Received
Without Error
Packets Received
With Error
Broadcast
Packets
Received
Packets
Transmitted
Without Error
Transmit Packets
Errors
Collisions
Frames
Time Since
Counters Last
Cleared
If you use the
Packets Received
Without Error
Broadcast
Packets
Received
Packets Received
With Error
18-4
The total number of packets (including broadcast packets and
multicast packets) received by the processor.
The number of inbound packets that contained errors prevent-
ing them from being deliverable to a higher-layer protocol.
The total number of packets received that were directed to the
broadcast address. Note that this does not include multicast
packets.
Total number of packets transmitted out the interface.
Number of outbound packets that could not be transmitted
because of errors.
Best estimate of the total number of collisions on this Ether-
net segment.
Elapsed time, in days, hours, minutes, and seconds since the
statistics for this port were last cleared.
parameter, the following information appears:
switchport
The total number of packets (including broadcast packets and
multicast packets) received by the processor.
The total number of packets received that were directed to the
broadcast address. Note that this does not include multicast
packets.
The number of inbound packets that contained errors prevent-
ing them from being deliverable to a higher-layer protocol.
v1.0, October 2008
System Maintenance Commands