No Monitor; Show Monitor Session - NETGEAR GSM7248R Command Line Interface Reference Manual

Command Line Interface Reference for the ProSafe 7200RS Series Layer-2 Stackable Switches
4.1.13.1 no monitor session
This command removes the monitor session (port monitoring) designation from the source
probe port, the destination monitored port and all VLANs. Once the port is removed from
the VLAN, the user must manually add the port to any desired VLANs.
Note: This command sets the monitor session (port monitoring) mode to disable
Format
Mode

4.1.14 no monitor

This command removes all the source ports and a destination port and restores the default
value for mirroring session mode for all the configured sessions.
Note: This is a stand-alone "no" command. This command does not have a
Default
Format
Mode

4.1.15 show monitor session

This command displays the port monitoring information for the system. The
parameter is an integer.
Format
Mode
Session ID
Admin Mode
Probe Port
Mirrored Port The interface configured as the mirrored port.
Port and System Setup Commands
and removes the source and destination interfaces.
no monitor session <session-id>
Global Config
"normal" form.
enabled
no monitor
Global config
show monitor session <sessionid>
Privileged EXEC
The session identifying number.
Indicates whether the Port Monitoring feature is enabled or
disabled. The possible values are enable and disable.
The interface configured as the probe port.
v1.0, October 2008
<sessionid>
4-7