NETGEAR GSM7248R Command Line Interface Reference Manual page 376

Command Line Interface Reference for the ProSafe 7200RS Series Layer-2 Stackable Switches
Replace the
<source>
the source or destination, use one of the following values:
<url>
xmodem | ymodem | zmodem | tftp://<ipaddr>/<filepath>/<filename>
For TFTP, the
to the file, and
Table 18-1. Copy Parameters
Source
nvram:clibanner
nvram:errorlog
nvram:log
nvram:script
<scriptname>
nvram:startup-config
nvram:traplog
system:running-config
<url>
<url>
<url>
<url>
<url>
<url>
18-20
and
<destination>
parameter is the IP address of the server,
<ipaddr>
is the name of the file you want to upload or download.
<filename>
Destination
<url>
<url>
<url>
<url>
<url>
<url>
nvram:startup-config
nvram:clibanner
nvram:script
<destfilename>
nvram:sshkeydsa
nvram:sshkeyrsa1
nvram:sshkeyrsa1
nvram:sslpemroot
v1.0, October 2008
parameters with the options in
Description
Copies the CLI banner to a server.
Copies the error log file to a server.
Copies the log file to a server.
Copies a specified configuration
script file to a server.
Copies the startup configuration to a
server.
Copies the trap log file to a server.
Saves the running configuration to
nvram.
Downloads the CLI banner to the
system.
Downloads a configuration script file
to the system. During the download
of a configuration script, the copy
command validates the script. In
case of any error, the command lists
all the lines at the end of the
validation process and prompts you
to confirm before copying the script
file.
Downloads an SSH key file. For more
information, see
Shell (SSH) Command" on page
Downloads an SSH key file.
Downloads an SSH key file.
Downloads an HTTP secure-server
certificate. For more information, see
Section 3.6 "Hypertext Transfer
Protocol (HTTP) Commands" on
page 16.
System Maintenance Commands
Table 18-1. For
is the path
<filepath>
Section 3.5 "Secure
14.