Clear Ip Route All; Show Ip - NETGEAR GSM7248R Command Line Interface Reference Manual

Command Line Interface Reference for the ProSafe 7200RS Series Layer-2 Stackable Switches

14.2.10 clear ip route all

This command removes all the route entries learned over the network.
Format
Mode

14.2.11 show ip

This command displays all the summary information of the IP. This command takes no
options.
Format
Modes
Default Time to
Live
Routing Mode
IP Forwarding
Mode
Maximum Next
Hops
14-12
clear ip route all
Privileged EXEC
show ip
Privileged EXEC
User EXEC
The computed TTL (Time to Live) of forwarding a packet
from
the local router to the final destination.
Shows whether the routing mode is enabled or disabled.
Shows whether forwarding of IP frames is enabled or dis-
abled. This is a configured value.
Shows the maximum number of next hops the packet can
travel.
v1.0, October 2008
Routing Commands