NETGEAR GSM7248R Command Line Interface Reference Manual page 193

Command Line Interface Reference for the ProSafe 7200RS Series Layer-2 Stackable Switches
Protocol Version
PAE Capabilities
Authenticator PAE
State
Backend
Authentication
State
Quiet Period
Transmit Period
Supplicant
Timeout
Server Timeout
Maximum
Requests
Port-Based Access and Authentication Commands
The protocol version associated with this port. The only pos-
sible value is 1, corresponding to the first version of the dot1x
specification.
The port access entity (PAE) functionality of this port. Possi-
ble values are Authenticator or Supplicant.
Current state of the authenticator PAE state machine. Possible
values are Initialize, Disconnected, Connecting, Authenticat-
ing, Authenticated, Aborting, Held, ForceAuthorized, and
ForceUnauthorized.
Current state of the backend authentication state machine.
Possible values are Request, Response, Success, Fail, Time-
out, Idle, and Initialize.
The timer used by the authenticator state machine on this port
to define periods of time in which it will not attempt to
acquire a supplicant. The value is expressed in seconds and
will be in the range 0 and 65535.
The timer used by the authenticator state machine on the
specified port to determine when to send an EAPOL EAP
Request/Identity frame to the supplicant. The value, in sec-
onds, has a range of 1 - 65535.
The timer used by the authenticator state machine on this port
to timeout the supplicant. The value, in seconds, has a range
of 1 - 65535.
The timer used by the authenticator on this port to timeout the
authentication server. The value, in seconds, has a range of 1
- 65535.
The maximum number of times the authenticator state
machine on this port will retransmit an EAPOL EAP
Request/Identity before timing out the supplicant. The value
will be in the range of 1 and 10.
v1.0, October 2008
11-11