Vlan Participation All; Vlan Port Acceptframe All - NETGEAR GSM7248R Command Line Interface Reference Manual

Command Line Interface Reference for the ProSafe 7200RS Series Layer-2 Stackable Switches
Participation options are:
include
exclude
auto

6.1.10 vlan participation all

This command configures the degree of participation for all interfaces in a VLAN. The ID
is a valid VLAN identification number
Format
Mode
Participation options are:
include
exclude
auto

6.1.11 vlan port acceptframe all

This command sets the frame acceptance mode for all interfaces. The modes defined as
follows:
• VLAN Only mode - Untagged frames or priority frames received on this interface are
discarded.
• Admit All mode - Untagged frames or priority frames received on this interface are
accepted and assigned the value of the interface VLAN ID for this port.
VLAN Commands
The interface is always a member of this VLAN. This is
equivalent to registration fixed.
The interface is never a member of this VLAN. This is equiv-
alent to registration forbidden.
The interface is dynamically registered in this VLAN by
GVRP. The interface will not participate in this VLAN unless
a join request is received on this interface. This is equivalent
to registration normal.
.
vlan participation all {exclude | include | auto}
<1-4093>
Global Config
The interface is always a member of this VLAN. This is
equivalent to registration fixed.
The interface is never a member of this VLAN. This is equiv-
alent to registration forbidden.
The interface is dynamically registered in this VLAN by
GVRP. The interface will not participate in this VLAN unless
a join request is received on this interface. This is equivalent
to registration normal.
v1.0, October 2008
6-5