NETGEAR GSM7248R Command Line Interface Reference Manual page 156

Command Line Interface Reference for the ProSafe 7200RS Series Layer-2 Stackable Switches
Leave Timer
LeaveAll Timer
Port GMRP Mode
8-8
onds (0.2 seconds). The finest granularity of specification is 1
centisecond (0.01 seconds).
Specifies the period of time to wait after receiving an unreg-
ister request for an attribute before deleting the attribute. Cur-
rent attributes are a VLAN or multicast group. This may be
considered a buffer time for another station to assert registra-
tion for the same attribute in order to maintain uninterrupted
service. There is an instance of this timer on a per-Port, per-
GARP participant basis. Permissible values are 20 to 600
centiseconds (0.2 to 6.0 seconds). The factory default is 60
centiseconds (0.6 seconds).
This Leave All Time controls how frequently LeaveAll PDUs
are generated. A LeaveAll PDU indicates that all registra-
tions will shortly be deregistered. Participants will need to
rejoin in order to maintain registration. There is an instance
of this timer on a per-Port, per-GARP participant basis. The
Leave All Period Timer is set to a random value in the range
of LeaveAllTime to 1.5*LeaveAllTime. Permissible values
are 200 to 6000 centiseconds (2 to 60 seconds). The factory
default is 1000 centiseconds (10 seconds).
Indicates the GMRP administrative mode for the port. It may
be enabled or disabled. If this parameter is disabled, Join
Time, Leave Time and Leave All Time have no effect.
v1.0, October 2008
GARP, GVRP, and GMRP Commands