Snmp-Server Traps; Snmp-Server Traps Bcaststorm - NETGEAR GSM7248R Command Line Interface Reference Manual

Command Line Interface Reference for the ProSafe 7200RS Series Layer-2 Stackable Switches
10.1.8.1 no snmp-server traps violation
This command disables the sending of new violation traps.
Format
Mode

10.1.9 snmp-server traps

This command enables the Authentication Flag.
Default
Format
Mode
10.1.9.1 no snmp-server traps
This command disables the Authentication Flag.
Format
Mode

10.1.10 snmp-server traps bcaststorm

This command enables the broadcast storm trap. When enabled, broadcast storm traps are
sent only if the broadcast storm recovery mode setting associated with the port is enabled.
Default
Format
Mode
10.1.10.1 no snmp-server traps bcaststorm
This command disables the broadcast storm trap. When enabled, broadcast storm traps are
sent only if the broadcast storm recovery mode setting associated with the port is enabled.
Format
Mode
SNMP Commands
no snmp-server traps violation
Interface Config
enabled
snmp-server traps
Global Config
no snmp-server traps
Global Config
enabled
snmp-server traps bcaststorm
Global Config
no snmp-server traps bcaststorm
Global Config
v1.0, October 2008
10-5