Select Paper; Rotate Copy; Interrupt; Reset The Settings - Muratec MFX-2530 Operating Instructions Manual

Select paper

Auto paper select
The machine selects suitable sized paper automati-
cally based on the document size and the
reduce/enlarge ratio.
Note: Make sure that the "Auto" is selected. If not,
select "Auto" by pressing [Paper] or using
cursor key.

Rotate copy

When the document is set at a different direction from the recording paper in the
paper cassette with auto paper select mode on, the machine automatically rotate
the scanned image by 90° to match the recording paper direction. However, this
applies to the 8.5" × 11"
size paper only.
Note: Rotate copy is not available with the following functions:
• Combine copy
• Repeat copy
• Directional Magnification copy
• Copying from multi-paper tray
• Copying with non standard sized paper

Interrupt

You can make copies during a multi-copy run.
1
Press . The interrupt key will light on.
INTERRUPT
2
Replace the document with new document for interrupt copying.
3
Make your copies.
4
After interrupt copying, press
off.
5
Reset the previous document by following the message on the LCD and press
[Start].
The remaining number of copies of the previous multi-copy run will be made
automatically.
All manuals and user guides at all-guides.com
Copy Ready
Ppr. Auto
Paper
again. The interrupt key will light
INTERRUPT

Reset the settings

Auto reset
During your operation, if any keys are not press
Set
1
machine reset the display to the initial screen a
100%
machine reset any key settings automatically.
Note: As default setting, the auto reset time is
Manual reset
Zoom Sort
Any time you press
press
this auto reset time. (See page 2.28.)
, the machine resets th
RESET
again to return the machine to its i
RESET