Network Diagnostic Utilities - Nortel 1110 Fundamentals

484 Appendix F IP Phone diagnostic utilities

Network diagnostic utilities

Network diagnostic utilities are available on the IP Phone itself (set-based),
or from the Command Line Interface (CLI) (server-based). Diagnostic
utilities provide testing and verification of end-to-end connectivity, verification
of statistics and settings, and retrieval of set information. For further
information about CLI, see
Network diagnostic utilities include Network Diagnostic Tools (Ping and
traceRoute), Ethernet Statistics, IP Networking Statistics, DHCP Information
Process, RUDP Statistics, and Network QoS Process.
See
description of diagnostic utilities available for each IP Phone state.
Network diagnostic utilities are available on the IP Audio Conference Phone
2033 in Remote Mode only.
For detailed information about Quality of Service (QoS) and Proactive Voice
Quality Management (PVQM), see Converging the Data Network with VoIP
Fundamentals (NN43001-260).
Table 69 "Network Diagnostic Utilities availability" (page 484)
Network Diagnostic Utilities available on the IP Phone in different states.
Table 69
Network Diagnostic Utilities availability
Function module
Local diagnostic tools
(Ping & TraceRoute)
Ethernet statistics
IP Networking statistics N/A
DHCP information
process
UNIStim/RUDP
statistics
RTP/RTCP statistics
Network QoS process
Copyright © 2003–2007, Nortel Networks
.
Table 69 "Network Diagnostic Utilities availability" (page 484)
After IP Address
Before IP
assignment,
Address
unregistered -
assignment
Local Mode
N/A Yes
Yes Yes
Yes
N/A Yes, part of
information
N/A N/A
N/A N/A
N/A N/A
Nortel Communication Server 1000
IP Phones Fundamentals
NN43001-368 02.01 Standard
Release 5.0 7 December 2007
"Using CLI Commands" (page
Registered (TPS)
-
Remote Mode
Yes
Yes
Yes
Yes
Yes
Yes
Yes, last call
511).
for a
lists the
Call in
progress
(TPS)
Yes
Yes
Yes
Yes
Yes
Yes
Yes, renew