Nortel 1110 Fundamentals page 189

22
23
24
25
26
Copyright © 2003–2007, Nortel Networks
.
Use the Right navigation key to scroll and highlight Retry. Use the
dialpad to fill in the information:
Retry—same as S1
Use the Right navigation key to scroll and highlight S2 PK.
S2 PK— the Private key of the alternate Secure Multimedia
Controller to which the IP Phone connects
Press the Enter key to start the edit mode.
To manually configure the PK, set DHCP to Partial or None.
S2 PK default is ffffffffffffffff.
If you use a Secure Multimedia Controller, enter a 16-digit
hexadecimal number.
Use the graphical keyboard or a USB keyboard to enter ALPHA
digits from A to F.
#1 = A
#2 = B
#3 = C
#4 = D
#5 = E
#6 = F
Use the Right navigation key to scroll and highlight Ntwk Port
Speed box. Press the Down navigation key to open the list box.
Use the Up/Down navigation keys to scroll and highlight one of the
following options:
•
Auto—Link speed is autonegotiated with the network device.
• 10BT Full—Link speed is available for up to 10 Megabit Full
Duplex on the network.
• 100BT Full—Link speed is available for up to 100 Megabit Full
Duplex on the network.
Use the Right navigation key to scroll and highlight Ntwk Port
Duplex box. Press the Down navigation key to open the list box.
The Ntwk Port Duplex option appears dimmed if Ntwk Port Speed
is set to Auto.
Use the Up/Down navigation keys to scroll and highlight one of the
following options:
• Auto—Duplex mode is autonegotiated with the network device
• Force Full—Duplex mode is forced to Full Duplex on the network
Nortel Communication Server 1000
IP Phones Fundamentals
NN43001-368 02.01 Standard
Release 5.0 7 December 2007
Installation and configuration 189