Nortel 1110 Fundamentals page 450

450 Features overview
•
Procedure 88
Enabling SRTP media encryption on a Phase II IP Phone and IP Phone 1110
Step
1
2
3
4
5
6
For more information about configuring an IP Phone, see the applicable
section in this document.
Procedure 89
Enabling SRTP media encryption on an IP Phone 2007
Step
1
2
3
4
5
Copyright © 2003–2007, Nortel Networks
.
IP Phone 1120E, IP Phone 1140E, and IP Phone
90 "Enabling SRTP media encryption on an IP Phone 1120E, IP Phone
1140E, or IP Phone 1150E" (page 451)
Action
Disconnect then reconnect the power on the IP Phone to reset it.
When the Nortel logo appears, press each of the four soft keys at
the bottom of the display in sequence from left to right, one at a time.
If no other configuration changes are required, press OK repeatedly
until PSK SRTP (0-No, 1-Yes) option appears.
Press 1 to enable PSK SRTP.
Press OK.
Restart the IP Phone.
Action
Tap the Tools icon.
Select Network Configuration.
Use the Right navigation key to scroll to Enable PSK SRTP. The
current setting displays.
Select the check box to enable SRTP media encryption.
Tap the Apply&Reset soft key to apply the current configuration
and reset the phone.
Nortel Communication Server 1000
IP Phones Fundamentals
NN43001-368 02.01 Standard
Release 5.0 7 December 2007
—End—
—End—
1150E—Procedure