Description - Nortel 1110 Fundamentals

60 Nortel IP Phone 2002
•
•
•
•
•
•
After you install and configure an IP Phone, if power to the phone is
interrupted, you need not re-enter the IP parameters, node number,
Terminal Number (TN), or reacquisition of firmware.

Description

The IP Phone 2002 uses the customer IP data network to communicate with
the Communication Server 1000 (CS 1000). The IP Phone 2002 translates
voice into data packets for transport using Internet Protocol. Use a Dynamic
Host Configuration Protocol (DHCP) server to provide information that you
can use for the IP Phone 2002 network and CS 1000 connections.
Figure 4 "IP Phone 2002" (page 61)
Copyright © 2003–2007, Nortel Networks
.
Procedure 11 "Installing an IP Phone 2002 for the first time using DHCP"
(page 82).
Procedure 12 "Enabling Full Duplex mode" (page
Procedure 13 "Checking Ethernet Statistics" (page
Procedure 14 "Changing the TN of an existing IP Phone 2002" (page
92).
Procedure 15 "Replacing an IP Phone 2002" (page
Procedure 16 "Removing an IP Phone 2002 from service" (page
Nortel Communication Server 1000
IP Phones Fundamentals
NN43001-368 02.01 Standard
Release 5.0 7 December 2007
91).
91).
93).
shows the IP Phone 2002.
94).