Enabling Bluetooth Wireless Technology; Manual Configuration - Nortel 1110 Fundamentals

532 Appendix G Bluetooth wireless technology

Enabling Bluetooth wireless technology

The following methods are available to enable Bluetooth wireless technology
on the IP Phone
•
•
Manual configuration
You can enable or disable Bluetooth wireless technology through the
Network Configuration menu. The Enable Bluetooth option provides
administration control over Bluetooth wireless technology. The following
values are available
•
•
•
When the IP Phone 1140E firmware is upgraded, or when the IP Phone is
received from the manufacturer with the latest firmware, the default power
up setting is Auto. When the setting is Auto, the setting received from the
TFTP Device Config file controls whether Bluetooth wireless technology
is enabled.
When the Bluetooth wireless technology setting is Yes or No, the value
received from the TFTP Device Config file is saved but is not used. The
Bluetooth wireless technology administration setting is forced enabled, or
Copyright © 2003–2007, Nortel Networks
.
Manual configuration— is used to set the Bluetooth wireless technology
mode on the IP Phone on a phone-by-phone basis. If manual
configuration is used exclusively, a TFTP server is not required to
configure Bluetooth wireless technology. For further information about
manual configuration, see
Use Procedure 128 "Configure the Bluetooth wireless technology
administration setting" (page 533)
technology through the Local Tools > Network Configuration
submenu.
TFTP configuration—is used to initially set the Bluetooth wireless
technology mode then the TFTP Server can be removed. The IP Phone
now retains the value and uses the last value received if no new value
is received.
Use Procedure 129 "Enabling Bluetooth wireless technology on the
IP Phone 1140E" (page
on the IP Phone 1140E using the TFTP configuration file (1140e.cfg)
retrieved during bootup.
If Bluetooth wireless technology is enabled on your phone, and
password-protection for the Local Tools menu has been enabled, you
can still double-press the Headset key to access the menu.
Auto—(default) Bluetooth wireless technology setting received through
TFTP configuration
Yes—Bluetooth wireless technology is enabled on the IP Phone
No—Bluetooth wireless technology is disabled on the IP Phone
Nortel Communication Server 1000
IP Phones Fundamentals
NN43001-368 02.01 Standard
Release 5.0 7 December 2007
"Manual configuration" (page
to configure the Bluetooth wireless
534)to enable Bluetooth wireless technology
532).