Nortel 1110 Fundamentals page 80

80 Nortel IP Phone 2002
Copyright © 2003–2007, Nortel Networks
.
Screen prompt
Duplex (0-A, 1-F, 2-H)
Data 802.1Q (0-N, 1-Y)
Data VLAN? (0-N, 1-Y)
Data VLAN Cfg? (0-Auto,
1-Man)
Data VLAN ID:
Data pBits (0-7, 8-Au)
PCUntagAll? (0-N, 1-Y)
PSK SRTP? (0-No, 1-Yes)
GARP Ignore?
(0-No,1-Yes)
The IP Phone 2002 supports remote firmware upgrades through a
TFTP process and an automated UFTP process.
You are prompted to enter the TFTP Server IP address if you are
using a TFTP Server to download the current firmware.
The method to upgrade the firmware depends on the following Call
Server software:
• For Succession Release 3.0 or CS 1000 Release 4.0, the TFTP
Server is required to download the current firmware. Enter the
TFTP Server IP address at the prompt
Nortel Communication Server 1000
IP Phones Fundamentals
NN43001-368 02.01 Standard
Release 5.0 7 December 2007
Description
Default 1 (for Auto).
0 = Auto
1 = Full
2 = Half
You are not prompted for Duplex if PC Port
is set to 0 for Off and if Speed is set to 0
for Auto.
You are not prompted for Data 802.1Q if
PC Port is set to 0 for Off.
Default 0 (for No).
You are not prompted for Data VLAN if PC
port is set to 0 for Off.
Default 1 (for Man).
You are not prompted for Data VLAN Cfg if
LLDP or Data VLAN are not enabled and
PC Port is set to 0 for Off.
If you select 0 (for Auto), VLAN ID is
automatically configured to the value
received in the VLAN NAME TLV.
You are not prompted for Data VLAN ID if
Data VLAN is set to 0 for Auto.
Default 8 (for Au).
You are not prompted for Data pBits if the
PC Port is set to 0 for Off or if 802.1Q is
not enabled.
Default 0 (for No).
Default 0 (for No).
Default 0 (for No).