Nortel 1110 Fundamentals page 157

5
Copyright © 2003–2007, Nortel Networks
.
Screen prompt
Speed (0-A, 1-10, 2-100)
Duplex (0-A, 1-F, 2-H)
GARP Ignore? (0-No,1-Yes)
Enter the following parameters:
802.1Q (0-No, 1-Yes)
Voice VLAN (0-N, 1-Y)
VLAN Cfg? (0-Auto, 1-Man)
Nortel Communication Server 1000
IP Phones Fundamentals
NN43001-368 02.01 Standard
Release 5.0 7 December 2007
Installation and configuration 157
Description
#3 = C
#4 = D
#5 = E
#6 = F
Network interface port speed.
Default 0 (for Auto)
0 = Auto
1 = 10 BT
2 = 100 BT
You are not prompted for Speed if
PC Port is set to 0 for Off.
Default 1 (for Auto).
0 = Auto
1 = Full
2 = Half
You are not prompted for Duplex if
PC Port is set to 0 for Off or if Speed
is set to 0 for Auto.
Default 0 (for No).
Default 1 (for Yes).
You are not prompted for 802.1Q if
LLDP is not enabled.
Default 0 (for No).
You are not prompted for Voice
VLAN if 802.1Q is not enabled.
Default 0 (for Auto).
0-Auto
Automatically obtains VLAN ID
using DHCP, or the 802.1ab data
switch.
1-Man
Enter the VLAN ID manually. This
is a number from 1 to 4094.
You are not prompted for VLAN
Cfg if Voice VLAN is not enabled.