Using The 2. Local Diagnostics Submenu; Using 1. Ip Set&Dhcp Information; Using 2. Network Diagnostic Tools; Using 3. Ethernet Statistics - Nortel 1120E User Manual

Configuring Local Menu options

Using the 2. Local Diagnostics submenu

Use the Local Tools menu
following:
• "Using 1. IP Set&DHCP Information" on page 56
• "Using 2. Network Diagnostic Tools" on page 56
• "Using 3. Ethernet Statistics" on page 56
• "Using 4. IP Network Statistics" on page 56
• "Using 5. USB Devices" on page 57
Note: Press the
submenu at any time while working tools in the Local Diagnostics
submenu. Use the
tests without exiting and reentering the Local Tools menu. For
example, you can check the Ethernet Statistics, then press
and enter the Network Diagnostics Tools to ping an IP address.
Using 1. IP Set&DHCP Information
The Network Configuration tool is used to view reports about IP set and
DHCP operation. This tool is for administrator use only.

Using 2. Network Diagnostic Tools

The Network Diagnostic Tools menu contains tools that are used to
diagnose network problems. This menu is for administrator use only.

Using 3. Ethernet Statistics

The Ethernet Statistics tool is used to view reports about Ethernet
operation. This tool is for administrator use only.

Using 4. IP Network Statistics

The IP Networks Statistics tool is used to view reports about network
operation. This tool is for administrator use only.
56
2. Local Diagnostics
Return
soft key to return to the Local Diagnostics
Return
key to quickly gather information and run
submenu to access the
Return