Installation - Nortel 1110 Fundamentals

LD 11 - Configure the Expansion Module
Prompt Response
REQ: NEW/CHG
TYPE 2050
... ...
KEM (0) - 3/<CR>
... ...
CLS KEM3
0 - <see
KEY
text>/<CR>
PAGEOFST <Page> <KeyOff-
set> / <CR>
KEY <key> <keys conf data>/
<CR>
KEMOFST <KEM> <Key-Off-
set> / <CR>
KEY <key> <keys conf data>/
<CR>

Installation

The Expansion Module 2050 can dock to the right side or the left side of
the IP Softphone 2050 main window. You can move the Expansion Module
2050 close the IP Softphone 2050 and it snaps into place.
Copyright © 2003–2007, Nortel Networks
.
Description
Add new or change existing data.
For IP Softphone 2050
...
Number of attached Expansion Modules 2050 (0). Supports
up to three Expansion Modules 2050.
...
KEM3 CLS must be defined
Key number range expanded to support number of
Expansion Modules 2050 specified by KEM prompt. The
range on the IP Softphone 2050 is as follows:
KEM value:
0
1
2
3
PAGEOFST is prompted if one Expansion Module 2050
is specified at the KEM prompt and <CR> is entered at
the KEY prompt. This prompt enables you to enter a Page
number of 0, or 1, and a Key Offset number from 0 to 17.
Once entered, the KEY is prompted with the appropriate
KEY value filled in. <CR> ends the input.
<key> is the key number for the Page + Key Offset entered
at PAGEOFST. Enter the key configuration <CR> or just
<CR>.
KEMOFST is prompted if two or three Expansion Modules
are specified at the KEM prompt and <CR> is entered for
KEY prompt.
This prompt enables you to enter a KEM number of 1, 2, or
3 and a KEY Offset number from 0 to 17. Once entered,
the KEY prompt is prompted with the appropriate KEY
value filled in. <CR> ends the input.
<key> is the key number for the KEM + Key Offset entered
at KEYOFST. Enter the key configuration <CR> or just
<CR>.
Nortel Communication Server 1000
IP Phones Fundamentals
NN43001-368 02.01 Standard
Release 5.0 7 December 2007
Installation 251
KEY range:
0 to 31
32 to 49
50 to 67
68 to 85