Replacing An Ip Phone 2001; Removing An Ip Phone 2001 From Service - Nortel 1110 Fundamentals

5
6

Replacing an IP Phone 2001

Two IP Phones cannot share the same TN. You must remove the IP Phone 2001
that currently uses the TN.
Procedure 7
Replacing an IP Phone 2001
Step
1
2
3
4

Removing an IP Phone 2001 from service

Procedure 8
Removing an IP Phone 2001 from service
Step
1
Copyright © 2003–2007, Nortel Networks
.
To obtain the password, enter the nodePwdShow command in
Element Manager. For further information, see Element Manager
System Reference—Administration (NN43001-632).
Select the Clear soft key to clear the existing TN.
Enter the new TN.
Action
Obtain the node and TN information of the phone you want to
replace.
Disconnect the IP Phone 2001 that you want to replace.
Follow Procedure 1 "Configuring the IP Phone 2001" (page 37)
Procedure 2 "Installing the IP Phone 2001 for the first time using
manual configuration" (page 40)
Phone 2001 for the first time using DHCP" (page 47)
configure the IP Phone 2001.
Enter the same TN and Node Number as the IP Phone 2001 you
replaced. The system associates the new IP Phone 2001 with the
existing TN.
Action
Disconnect the IP Phone 2001 from the network or turn off the power.
Nortel Communication Server 1000
IP Phones Fundamentals
NN43001-368 02.01 Standard
Release 5.0 7 December 2007
Removing an IP Phone 2001 from service 57
—End—
ATTENTION
or Procedure 3 "Installing an IP
—End—
and
to install and